Receiver Series-C2/C2L 1000W Motor Control Board | Industrial Door & Roller Shutter Controller
Product Overview
Receiver Series-C2/C2L is a professional motor control board engineered for roller shutters, industrial doors, and commercial automation systems.
Supporting dual voltage input and multiple reception protocols, it delivers stable signal reception and intelligent motor control. With built-in safety edge support, obstruction rebound, auto-close function, and configurable operation modes, the C2 series provides reliable and flexible control for demanding industrial applications.
Key attributes
The C2 board is compatible with the following receiver housings:
R03
R09
R20
R36
This broad housing compatibility allows installers and system integrators to select suitable enclosure types according to project requirements and installation space.
Compatibility & Configuration
The C1 control board is designed for flexible integration with multiple external housing options, including R03, R09, R18, R20, and R36, allowing it to adapt to different installation requirements and system layouts.
For optimized performance, specific housing models are matched with dedicated remote controllers:
R03 – compatible with Remote Controller 006
R09 – compatible with Remote Controller 017
R20 – compatible with Remote Controller 001
R36 – compatible with Remote Controller 039
This structured compatibility ensures stable signal transmission, simplified configuration, and efficient system deployment across various automation applications.
DATA PARAMETERS
Parameter | Specification |
|---|---|
Input Voltage (VAC) | 230 / 110 |
Max Power (W) | 1000 |
Auxiliary Voltage | 24VDC |
Frequency (MHz) | 433 |
Reception Protocol | DE1527 / PJ301 |
Remote Control Quantity | 20 |
Quantity Overflow Tip | None, automatic coverage |
Reception Distance (m) | 70 |
Alarm Light | AC Thyristor |
Emergency Stop | Not supported (-) |
Infrared Protection | Normally closed, no short circuit required |
Safety Edge Protection | Support (●) |
Obstruction Action | Rebound |
Limit Detection | 1-way optocoupler |
Remote Learning | Support (●) |
Motor Commutation | Support (●) |
Auto-Close Function | Support (●) |
Stroke Learning (Run Time) | Supported and duration can be set |
Function Reset | Dial return |
Impulse / Deadman Mode | Switchable |
Single / Multi-Key Mode | Switchable |
External Single-Key Switch | Support (●) |
External Multi-Key Switch | Yes, only open |
Controller Button Switch | Not supported (-) |
Code Clearing Function | Support (●) |
FAQs
1. What applications is the C2/C2L receiver designed for?
It is designed for industrial doors, roller shutters, and motorized access systems that require stable reception, intelligent control logic, and integrated safety protection.
2. Which remote control protocols does the C2 support?
The C2 series supports both DE1527 and PJ301 reception protocols, increasing compatibility with different transmitter systems.
3. Does it support safety protection features?
Yes. It supports safety edge protection, infrared protection input, obstruction rebound, and limit detection to enhance operational safety.
4. Can the board store multiple remote controls?
Yes. It supports learning up to multiple remotes with automatic coverage when memory is full, ensuring continuous usability.
5. Does the receiver support automatic closing?
Yes. The auto-close function is supported, and the operating time (stroke learning) can be configured based on installation requirements.
6. Does it support different control modes?
Yes. Impulse and deadman modes are switchable, and single-key or multi-key operation modes can be configured according to project needs.
